 |
| More information on the model
2420 |
  |
Three channel memory settings |
| The memory setting
function makes routine work easy and simple, storing
centrifugal speed, RCF and time. It is possible to save,
recall and operate the centrifugal condition just by
pushing the program
switches. | |
Tachometer-port |
| The 2420 has a
tachometer-port on its lid to check the actual speed.
The validation of the speed sensor by measuring the
actual speed is highly needed for stringent GMP
requirements. | |
Five types of notification sounds |
The notification sound
can be selected from one buzzer and 4 melodies. This
will be useful to identify each unit when several units
are used in the same room.
And also, mute setting is
available. | |
Acceleration/Deceleration (Two-level
switching) |
| The 2420 model provides
two-level switching for both acceleration and
deceleration, corresponding to application requirements.
For example, in those cases where one must avoid
whirring up the samples, a slow deceleration can be
programmed so as to achieve the desired conditions and
most accurate results. | |
Digital display and control knob |
| The control knob and
digital display provide users with an easy-to-operate
interface. The control knob is much easier to set than
up-down-keys, and the degital display clearly indicates
each parametier. | |
Indication of the correct RCF
value |
| Actual rotation radius
can be set and indication of correct RCF is
realized. | |
Balancing of the sample |
| The 2420 model enables
one to reduce the experiment time, allowing centrifugal
separation to be carried out with eye measured sample
balancing. With its tolerable inbalance sensor, it is
not necessary to balance the sample with remarkable
accuracy. In addition, the operation is smooth and it
maintains a quiet
environment. | |
 TOP |
