 |
| More information on the 3700 model |
  |
Three types of high speed micro refrigerated
centrifuges |
KUBOTA is producing three
types of high speed micro refrigerated centrifuges to
meet the various requirements of the customers. To see
the difference among them click below for more information.
 |
|
High Speed Conical Rotor, AF-5004CH |
Isolating "sticky" proteins requires
high g-force, at which tube breakage, such as neck
bending, is common. Kubota's newly designed high-speed
conical rotor allows safe centrifugation up to
22,140xg for isolating even the stickiest of protein.
|
|
Biohazard-proof rotor |
Biohazard-proof rotors
are ensured to maintain the aerosol and sample liquid
between the rotor and its lid, certified with CAMR standard
test procedures
|
|
Automatic rotor identification and one-touch rotor function
|
| The automatic rotor identification
and one-touch rotor functions, developed using KUBOTA's
advanced technologies, facilitate easy interchange of
rotors. These functions enable changing rotors, corresponding
to applicationsｰ requirements, without setting the rotor
IDs or fastening rotors. |
|
Pre-cooling (unit which is made after March,
2002) |
| The pre-cooling function
saves on the amount of time required to reach low temperature
and protects those samples that are easily deactivated
at normal temperature. Under typical conditions applying
samples with high speed requires a long time to reach
desired the low temperature. In such cases, pre-cooling
enables reaching a low temperature before the experiments,
thus saving valuable time. In addition, Genomics experiments,
such as DNA or RNA purification, require the maintenance
of a low operating temperature in order to obtain valid
results. |
|
Multi rotor for micro tubes, MF-2236 |
| The MF-2236, a multi
rotor for micro tubes, provides a reasonable solution
to apply various types and sizes of tubes simply by changing
buckets. For example, the MF-2236 accepts 8 PCR-strips,
and 0.4, 0.5 and 2mL tubes. |
|
g.sec integrator function |
| The g.sec integrator
function optimizes the protocols in those cases where
customers need to achieve exactly the same centrifugal
effect. One can obtain the same effect just by setting
the g.sec value in the 3700 model. The g.sec integrator
function enables one to control centrifuge spins with
the same centrifugal effect and to calculate g.sec value. |
|
Acceleration/Deceleration (Three-level switching) |
| The 3700 model provides
Three-level switching for both acceleration and deceleration,
corresponding to application requirements. For example,
in those cases where one must avoid whirring up the samples,
a slow deceleration can be programmed so as to achieve
the desired conditions and most accurate results. |
|
Foot pedal
(Option) |
| An optional foot pedal
(option) allows hands-free lid opening, enabling the interlock
mechanism to be released by a foot pedal. |
|
Alarm indicator and automatic stop functions |
| Various alarm indicators
and automatic stop functions improve safety further and
stop the operation immediately after activation in the
case of an emergency. The 3700 model is equipped with
an alarm indication function including imbalance detection,
abnormally high temperature detection, speed sensor and
temperature sensor fault detection. The rotor sensor detects
whether the rotor is set correctly to the drive shaft.
In addition, the unit is fitted with a circuit breaker. |
|
 TOP |
