 |
| More information on the 5200 model |
Three types of tabletop centrifuges |
KUBOTA is producing three
types of general-purpose tabletop centrifuges to meet
the various requirements of the customers. To see the
difference among them click below for more information.
 |
|
Sealing adapter for ST-480 rotor |
The sealing adapter,
specially designed for the ST-480 rotor, provides
customers with a perfect solution to handle bio-hazardous
experiments such as tests of acid-fast bacteria.
Three kinds of adapters are available: the customer
can spin 15 and 50mL conical (TC) and 50mL Oak ridge
type tubes with a sealing adapter at over 4,000xg.
 |
|
Two-level switching deceleration |
| The 5200 model
provides Two-level switching for deceleration, corresponding
to application requirements. For example, in those
cases where one must avoid whirring up the samples,
a slow deceleration can be programmed so as to achieve
the desired conditions and most accurate results. |
|
Alarm indicator and automatic stop
functions |
| Various alarm indicators
and automatic stop functions improve safety further
and stop the operation immediately after activation
in the case of an emergency. The 5200 model is equipped
with an alarm indication function including imbalance
detection and speed sensor fault detection. In addition,
the unit is fitted with a circuit breaker. |
|
Balancing of the sample |
| The 5200 model
enables one to reduce the experiment time, allowing
centrifugal separation to be carried out with eye
measured sample balancing. With its tolerable imbalance
sensor, it is not necessary to balance the sample
with remarkable accuracy. In addition, the operation
is smooth and it maintains a quiet environment. |
|
Digital display and control knob |
| The control knob
and digital display provide users with an easy-to-operate
interface. Especially, the controlknob is much easier
to set than up-down-keys. |
|
 TOP |
