 |
| More information for the 5220 model |
  |
Three types of tabletop centrifuges |
KUBOTA is producing three
types of general-purpose tabletop centrifuges to meet
the various requirements of the customers. To see the
difference among them click below for more information.
 |
|
Sealing
adapter for ST-480M rotor |
The sealing adapter,
specially designed for the ST-480M rotor, provides
customers with a perfect solution to handle bio-hazardous
experiments such as test of acid-fast bacteria. Three
kinds of adapters are available; the customer can spin
15 and 50mL conical (TC) and 50mL Oak ridge type with
sealing adapter at over 4,000xg.
|
|
Three channel memory settings |
| The memory setting function
makes routine work easy and simple, storing centrifugal
speed, RCF and time. It is possible to save, recall
and operate the centrifugal condition just by pushing
the program switches. |
|
Acceleration/Deceleration (Three-level switching) |
| The 5220 model provides
Three-level switching for both acceleration and deceleration,
corresponding to application requirements. For example,
in those cases where one must avoid whirring up the
samples, a slow deceleration can be programmed so as
to achieve the desired conditions and most accurate
results. |
|
Five types of notification sounds |
| The notification sound
can be selected from one buzzer and 4 melodies. This will
be useful to identify each unit when several units are
used in the same room. |
|
Tachometer-port |
| The 5220 has a tachometer-port
on its lid to check the actual speed. The validation
of the speed sensor by measuring the actual speed is
highly needed for stringent GMP requirements. |
|
Balancing of the sample |
| The 5220 model enables
one to reduce the experiment time, allowing centrifugal
separation to be carried out with eye measured sample
balancing. With its tolerable imbalance sensor, it
is not necessary to balance the sample with remarkable
accuracy. In addition, the operation is smooth and
it maintains a quiet environment. |
|
Alarm indicator and automatic stop
functions |
| Various alarm indicators
and automatic stop functions improve safety further
and stop the operation immediately after activation
in the case of an emergency. The 5220 model is equipped
with an alarm indication function including imbalance
detection and speed sensor fault detection. The rotor
sensor detects whether the rotor is set correctly to
the drive shaft. In addition, the unit is fitted with
a circuit breaker. |
|
 TOP |
