KUBOTA 日本久保田离心机产品一览
首页
产品一览
+7700
  + 技术规格
  + 转子/吊桶/
     试管架列表
     + Swing rotor
  + 更多信息
公司简介
离心力计算
联系经销商
联系我们
站点导航
ISO logo
KUBOTA久保田的藤冈工厂于1996年通过ISO9001 认证。
转子/吊桶/试管架列表 7700型

Rotor Name Maximum Capacity Tube Sizes (mm)
diam. x length
Maximum Speed
(rpm)
Maximum RCF
(xg)
Micro Tube Rotor
AG-224 (*1) 24 x 2mL 9.5-11 x 36-37 22,000 44,371
RA-159G (*1,3) 72 x 2mL 9.5-11 x 36-42 13,500 24,246
RS-35G (*1,3)
(Swinging Bucket Rotor)
16 x 0.2mLPCR 5.9-6.3 x 20-24 15,000 11,820
20 x 0.5mL 7-7.9 x 25-34 15,000 16,099
16 x 2mL 9.5-11 x 36-42 15,000 18,363
Fixed Angle Rotor
AG-716(*3) 16 x 7mL 15.9-16.4 x 60-64 22,000 48,700
AG-1212 12 x 12mL 15.9-16.4 x 103-109 22,000 51,946
AG-1224 (*3) 24 x 12mL 15.9-16.4 x 103-105 18,500 42,855
AG-506R (*1,2) 6 x 50mL 28.7-29 x 103-109 21,000 47,824
AG-508R (*1,2) 8 x 50mL 28.7-29 x 103-109 19,000 43,588
AG-508CA(*1) 8 x 50mL Conical (TC) 30 x 117 16,500(*7) 36,525
AG-6512C (*3) 12 x 50mL Conical (TC) 30 x 117 11,500 20.995
12 x 15mL Conical (TC) 17 x 121 11,500 17,594
AG-1008A(*1,2,3) 8 x 100mL 38 x 114 15,500 35,186
AG-2506(*1) 6 x 250mL 60-62.4 x 119-137 12,000 22,860
AG-5004(*1,2,3) 4 x 500mL 69-70.2 x 155-170.5 10,000 17,105
AG-5006(*1,2,3) 6 x 500mL 69-70.2 x 155-170.5 8,500 13,651
RA-360G (*3) 24 x 15mL 16 x 126 3,500 2,273
TOP返回页首
Swinging Bucket Rotor
RS-200G (*1,2,3) 4 x 50mL 28.7-29.3 x 101-115 11,500 20,699
RS-410G (*1,2) 4 x50mL Conical (TC) 29.5 x 117 5,000 4,164
RS-480 (*1,2,3) 4 x 50mL Conical (TC) 30 x 117 5,000 4,639
RS-720G (*1) 8 x 50mL Conical (TC) 30 x 117 3,500 2,328
RS-730G (*1,2) 8 x 50mL Conical (TC) 29.5 x 117 4,200 3,589
12 x Microtiter Plate 86(W) x 130(D) x 49(H) 4,200 3,175
4 x Deep-well Plate
RS-1400GA(*1,3) 4 x 250/350mL 65-71 x 100-128 5,000 / 4,000 4,807 / 3,076
RS-3011G (*1,2) 24 x 50mL Conical (TC) 30 x 117 3,100 2,009
8 x Microtiter Plate 88(W) x 134(D) x 50(H) 3,100 1,783
4 x Deep-well Plate
8 x Microtiter Plate 92(W) x 133(D) x 36(H) 2,000 769
TOP返回页首
Microtiter Plate Rotor
RMP-89G(*4) 8 x Microtiter Plate 86(W) x 130(D) x 89(H) 2,400 1,075
4 x Deep-well Plate
RS-745GS(*3,5,6 ) 12 x Microtiter Plate 86(W) x 128(D) x 90(H) 4,200 3,096
4 x Deep-well Plate
RS-751GS(*3,5,6) 12 x Microtiter Plate 86(W) x 128(D) x 90(H) 5,500 5,309
4 x Deep-well Plate
Soil dehydration rotor
RH-1004 (*3) 4 x 100mL sampling tube 50 x 51 10,000 9838
(PF: more than 4.2 inclusive)
(*1) Other than above buckets, tube racks, and adapters are also available. Please contact your local dealer.
(*2) Several kinds of sealing cap, sealing adapter and sealed cover is available. Please contact your local dealer for more detailed information.
(*3) Regarding the delivery schedule, please contact your local dealer.
(*4) The adapters 055-6370 is available (Option). This adapter makes easy to hadle the micro titer plate, especially they are stacked.
(*5) The adapters 055-6380 is requiered (Option).
(*6) If microtiter plates are used, it is possible to stack them in double or more on each bucket. However, be sure to test the strength of those plates prior to centrifugation. The microtiter plate at the bottom may be crushed.
(*7) The 7700 is able to hold the sample temperature below 4°C at each rotor's maximum speed and RCF.
Regarding to the other rotor, please refer to the instruction manual.
(Under the condition that ambience temperature is 25°C)
TOP返回页首

久保田商事株式会社 版权所有 2005年