KUBOTA 日本久保田离心机产品一览
首页
产品一览
+2420
  + 技术规格
  + 转子一览
  + 转子/吊桶/
     试管架列表
  + 更多信息
公司简介
离心力计算
联系经销商
联系我们
站点导航
ISO logo
KUBOTA久保田的藤冈工厂于1996年通过ISO9001 认证。
更多信息 2420型
资料下载PDF logo

Three channel memory settings
The memory setting function makes routine work easy and simple, storing centrifugal speed, RCF and time. It is possible to save, recall and operate the centrifugal condition just by pushing the program switches.


Tachometer-port
The 2420 has a tachometer-port on its lid to check the actual speed. The validation of the speed sensor by measuring the actual speed is highly needed for stringent GMP requirements.


Five types of notification sounds
The notification sound can be selected from one buzzer and 4 melodies. This will be useful to identify each unit when several units are used in the same room.


Acceleration/Deceleration (Two-level switching)
The 2420 model provides two-level switching for both acceleration and deceleration, corresponding to application requirements. For example, in those cases where one must avoid whirring up the samples, a slow deceleration can be programmed so as to achieve the desired conditions and most accurate results.


Digital display and control knob
The control knob and digital display provide users with an easy-to-operate interface. The control knob is much easier to set than up-down-keys, and the degital display clearly indicates each parametier.


Indication of the correct RCF value
Actual rotation radius can be set and indication of correct RCF is realized.


Balancing of the sample
The 2420 model enables one to reduce the experiment time, allowing centrifugal separation to be carried out with eye measured sample balancing. With its tolerable inbalance sensor, it is not necessary to balance the sample with remarkable accuracy. In addition, the operation is smooth and it maintains a quiet environment.
TOP返回页首

久保田商事株式会社 版权所有 2005-2010年